How To Wire A Light Switch in Australia?

Introduction

Australia has industrial, residential, and commercial buildings, along with some Federal laws regarding electric work. The broken electric circuit is a headache for Australians because an unlicensed person cannot fix the system or, you can say, is not allowed to fix it. Changing a bike’s tire is easier than setting a broken switch, especially from scratch. Simple things like changing a fuse, lamps, or cells are not prohibited. However, other electric work is forbidden to ensure the security of citizens. Let’s look at how to wire a light switch in Australia.

What is A Lightswitch?

Before going into details, let’s define a light switch.

A light switch is an electrical device through which you can turn or off the electrical devices. It is also called an outlet or a socket. There are many different types of switches available, depending on the type of design you like.

Level 1 and Level 2

Commonly, a light switch has two terminals: L1 and L2. The terminals start working when one of them is OFF, and the other one is ON. For instance, if L1 is ON, then L2 is OFF. This is how both the terminals help turn the light OFF and ON.

Methodology

In this technological century, electricity has become a crucial part of life. It’s a very rare sight to see a place without electricity. If you need an instant switch recovery, call an electrician to perform this duty. However, if the electrician is unavailable, here’s how the simplest method to wire a light switch takes the following steps.

• Turn off the main power switch. It’s important as electricity is dangerous and harmful when wires are open.
• Secondly, you’ve to unscrew the socket to change the wires.
• Next, you should consider the wires’ colour combination. Take this method seriously. The working of the switch depends on the properly inculcated wires. After removing the wires from the socket, install a new switch in the same way as you pulled out before.
• Re-install the screws and place the sockets back to its place.

Types of Wires

There are some fixed wires in the electric system of Australia. You need to cautiously connect the wires with the correct one while avoiding direct contact with the wires.

• Active—Brown
• Neutral—Blue
• Earth—Green and Yellow

General Standard

The General Standard for an Australian house to use sockets, outlets, and switches is 48-52 inches above the ground.

Legal Terms

The Australian government has some laws regarding electrical work. You cannot upgrade your DIY credentials by working on electric circuits. You should have a license to operate or hire a certified professional with experience as an electrician.

If you work without a license, you’ll face serious consequences like penalties. There are strict rules from the Federal law of Australia for every state.

Whom To Consult?

You can consult Sparks Plus the renowned Sydney electrical company to hire electricians. Sydney is known for licensed electricians, so finding one will be fine. A professional electrician can fix your switch issues without any delay. You just have to book an appointment beforehand.

For emergencies, electricians are also available. For instance, if the circuit breaks and you need an instant aid, you can contact your emergency electrician.

Conclusion

Electrical emergencies are not a joke for human life. The slightest contact with open or broken switches can cost you a life. Don’t touch electrical appliances until you have an experience. For regular checking, book an appointment with the most trusted electrician in Sydney, like ‘Sparks Plus Electrician.

Frequently Asked Questions (FAQs)

What to do in electrical emergencies, especially if I don’t know how to wire a light switch?

First of all, turn off the main switch and immediately call a local electrician for help. If the local electrician is unavailable, contact Sparks Plus Electricians to help recover your electrical issue.

What is the expertise of an emergency electrician?

An emergency electrician can detect the problem in an instant after looking at broken or burnt switches and other electrical appliances.

What to do for a permanent fix?

You should get your electrical appliances, outlets, and switches checked properly timely. A timely check-up can save you from many problems in the future.